Connection Via Ingecon Connect; Communication For The Direct Self Consumption Kit - Ingeteam INGECON SUN 1Play TL M Serie Manual De Instalacion Y Uso

Connection of accessories

7.3. Connection via INGECON Connect

The figure below shows the connection of a communication accessory in the INGECON connector. Follow the same
procedure for any communication accessories that need to be installed in this connector.

7.3.1. Communication for the direct self consumption kit

In direct self consumption kit installations, the inverter must communicate with a wattmeter. In order to establish
this communication via RS-485, the corresponding accessory included in the self consumption kit must be
installed, .as shown in the following figure
After making the connections in the connector indicated in the previous figure, the necessary wiring for its proper
installation will leave the unit through the cable gland supplied together with the accessory to be installed in the
dedicated wiring access.
ABE2011IQM01_C - Installation and Operation Manual
Ingeteam
DE
EN
ES
FR
IT
PT
83