Opening And Closing The Housing - Ingeteam INGECON SUN 1Play TL M Serie Manual De Instalacion Y Uso

Installing the unit
5. Mark the lower attachment point, remove the unit and drill the hole in the wall. Install the unit again and
fix the bottom attachment using a suitable fastening element. Said hole has a diameter of 7.5 mm.
6. Check that the unit is properly secured.
Once the unit has been installed correctly, the connection process will begin.
Make the connections in the following order:
1. Connection of accessories (optional).
2. AC connection.
3. DC connection.
It is mandatory to follow the order described above. Do not switch on the power until you have made
all the connections and closed the unit.

6.3. Opening and closing the housing

To install the equipment it is not necessary to open the housing unless you wish to modify the ground
connection or install an accessory.
ABE2011IQM01_C - Installation and Operation Manual
Ingeteam
DE
EN
ES
FR
IT
PT
77