Anspach eMax 2 Manual De Instrucciones página 5

Symbols
Indicates the drill tip exposure
Located on the Console this indicates Hand
Control activation
Duty Cycle of the DRIVER
Located on the Console this indicates Forward
(Clockwise rotation when looking at handpiece
from proximal end).
Indicates action of rotation and position for
Secure (LOCK) and Release (UNLOCK)
Direction of rotation
Direction of rotation for lock position
Located on the Foot Pedal switch this indicates a
change of rotational direction for the handpiece
Located on the Console this indicates a change
of rotational speed rate for the Handpiece
Temperature Limits
CE Mark (A.K.A. CE Mark [Notified body
number], Conformité Européenne)
0086
Meaning: Device complies with applicable EEC
Directives
Found on the Console ON/OFF
Lock (Run)
Located on the Console Irrigation Pump these
symbols are not used by the user since the pump
is self-adjusting to the Irrigation Tube Diameter
Reference Number (A.K.A> Item Number,
Catalogue Number, Part Number)
Lot (A.K.A. Lot Number, Batch Number,
Batch Code)
Manufacturer
00/0000
Use By Date (A.K.A. Expiration Date, Expiry)
Authorized European Union Representative
Sterilized Using Irradiation
Date of Manufacture
Batch or Lot Number
Serial Number
Global Trade Item Number
Indicates Environmental Friendly Use Period of
10 years in China.
Symbol with yellow background: CAUTION:
refer to accompanying documentation
Located on the Console this indicates Foot
Control connector
Revolution per Minute
Located on the Console this indicates Reverse
(Counter-Clockwise rotation when looking at the
handpiece from proximal end)
Located on the Console this indicates a change
of irrigation state for the Console Irrigation
System
Direction of rotation
1. Console Control Touch pad: indicates a
change state (on/off) for the Console Irrigation
System
2. Irrigation Pump: Indicates irrigation tube
direction towards the irrigation source
Located on the Foot Pedal switch this indicates
a change state (on/off) for the Console Irrigation
System
NO NOT DISPOSE OF IN HOUSEHOLD
WASTE
Sterile unless damaged or open
United States Federal Law restricts this device
to sale by or on the order of a physician or other
licensed health-care provider
Located in the Console Irrigation Pump this
indicates a possible finger pinch point
Unlock (Load)
Located on the Handpiece this indicates
position of the knurl knob to the desired location
Serial Number
Transmitter Interference may occur in the
vicinity of equipment marked with this symbol.
Type B Electrical Equipment
Product warranty is void if seal is damaged
or removed.
Single Use Only (A.K.A. Do Not Reuse)
CAUTION: Refer to accompanying
documentation
Global Trade Item Number (GTIN)
Expiration Date (YYMMDD)
Quantity
Indicates Environmental Friendly Use Period of
50 years in China.
3