Password; Mains Water Pressure; Technical Level Programming; Maintenance - Bezzera VICTORIA Manual De Instrucciones

in which it is possible to set different on and off
times (two for each day of the week) of the single
machine element.
Press "SYNCHRONIZE" to transfer the settings to
all the days of the week, then select the day you
are closed by setting the on/off time to 00 - 00.
By setting identical on and off times (different to
00:00, the machine will be switched on for the
entire day selected)

5.12.14 Password

The machine is delivered with the user menu pas-
sword set to 1901.
It is possible to activate/deactivate or modify the
password to access the user menu.

5.12.15 Mains water pressure

It is possible to check the water input pressure by
pressing the "NET PRESSURE" key. After pressing
the "TEST" key, a dose will be dispensed and
then, the mains water supply pressure will be di-
splayed in real time.

5.13 Technical level programming

This part of the menu is exclusively reserved for
the installation technician. Changing even just
one set value will compromise the machine's pro-
per operation.

6 - MAINTENANCE

Follow the maintenance instructions indicated be-
low to operate the machine correctly.

6.1 Safety rules

Do not clean the machine with jets of water. Do
not immerse the machine in water when cleaning.
If the machine malfunctions, do not attempt to
repair it yourself and immediately contact tech-
nical support.
If the power cord is damaged, do not replace it
yourself. Perform the safety measures below and
contact the technical support.
Machine safety measures:
for maintenance operations and/or malfunctions
and cleaning: turn the power cut-off switch to "0"
and/or remove the plug from the power socket;
close the shut-off valve for the main water supply.
Do any cleaning/maintenance work when the
machine is cold and wear protective gloves.
Conditions for best machine operation:
- room temperature must be between +5°C and
+32°C. If the machine has been exposed to sub-
zero temperatures, follow the instructions given
below:
ensure that the machine has been in a place whe-
re the temperature is higher than +15°C for 24
hours before turning it on.
- the mains water pressure must be between 0
and 6 bar (0 - 0.6 MPa).

6.2 Cleaning the machine

Warnings: For the best results and in
compliance with current regulations,
change the water in the boiler and
pipes when starting the machine eve-
ry day.
48
BEZZERA VICTORIA
MOD.