Espresso Profile Creation; Drip Profile Creation - Bezzera VICTORIA Manual De Instrucciones

Here it is possible to change the profile alrea-
dy assigned to the key selected by means of the
"EDIT CURRENT" key .
Assign an existing profile to the selected key by
selecting it from the profile manager profile list
using the "LOAD PROFILE" button.
Create a new ESPRESSO, DRIP or TEA profile by
pressing one of the dedicated keys.
To create a profile without assigning it to any key
but saving it in the profile list, access the profile
manager
Pressing the CREATE PROFILE button will display
the screen where it is possible to select the type of
profile to be created

5.8.1.1. ESPRESSO profile creation

After choosing to create an ESPRESSO profile, the
following screen will appear on the display
By entering the total quantity of water to be used
for preparation of the ESPRESSO beverage, three
different profiles are proposed which are pre-set
and can be selected using the keys
REGULAR
ACID
BITTER
These pre-set profiles are the Bezzera options to
obtain different characteristics from your favourite
coffee.
It is possible to customise the dosing profile by
pressing the CUSTOM key. In this mode all the
extraction parameters can be changed.
Select the first sector of the graph to modify the
pre-infusion parameters (dose and pause time).
Select sectors 2, 3 and 4 to change the dosing
parameters (dose and pressure).
Pressing the RESTORE key restores the profile pa-
rameters before the change starts.
By pressing the TEST key, it is possible to dispense
the profile created.
Pressing the SAVE key will display a keyboard to
assign a name to the profile created (maximum 8
alphanumeric characters) and to save it.

5.8.1.2. DRIP profile creation

After choosing to create a DRIP profile, the fol-
lowing screen will appear on the display
43
BEZZERA VICTORIA
MOD.