Tea Profile Creation; Profile Assignment; Dispensing Coffee In A Pot - Bezzera VICTORIA Manual De Instrucciones

By entering the total quantity of water that you
want to use to prepare the DRIP drink, a REGU-
LAR pre-set profile. It is possible to customise the
dosing profile by pressing the CUSTOM key. In
this mode all the extraction parameters can be
changed. Select one of the four available sectors
to modify the extraction parameters (dose and
pause time).
Pressing the RESTORE key restores the profile pa-
rameters before the change starts.
By pressing the TEST key, it is possible to dispense
the profile created.
Pressing the SAVE key will display a keyboard to
assign a name to the profile created (maximum 8
alphanumeric characters) and to save it.

5.8.1.3. TEA profile creation

After choosing to create a TEA type profile the
display will show the following screen
By entering the total quantity of water to be used
for the preparation of the TEA beverage, a pre-
set REGULAR profile is proposed. It is possible to
customise the dosing profile by pressing the CU-
STOM key. In this mode all the extraction para-
meters can be changed. Select one of the three
available sectors to modify the extraction para-
meters (dose and pause time).
Pressing the RESTORE key restores the profile pa-
rameters before the change starts.
By pressing the TEST key, it is possible to dispense
the profile created.
Pressing the SAVE key will display a keyboard to
assign a name to the profile created (maximum 8
alphanumeric characters) and to save it.

5.8.2 PROFILE assignment

To assign a profile created to a specific dose key,
access the PROFILE MANAGER menu using the
appropriate keys in the group menu and in the
drop-down menu (which can be opened by pres-
sing the Bezzera logo on the main screen).
From the PROFILE MANAGER menu, it is possi-
ble to select the group and the key to which to
assign a profile and then to press the name of
the desired profile to perform the assignment.
By pressing, instead, on the icon to the right of
the profile name, a multiple-choice screen is di-
splayed
where it is possible to choose to try, modify or
eliminate the selected profile.

5.9 Dispensing coffee in a pot

Coffee can be dispensed directly into a pot or
tall cup.
To perform this procedure, remove the base grille,
as shown in Fig. 08, then position the cup and
dispense the coffee as previously described.
44
BEZZERA VICTORIA
MOD.