OHAUS Adventurer SL Serie Manual De Instrucciones página 10

EN-6
2.2.2 Assembly of Models AS64, AS214, AS313 (Cont.)
4.Install the glass doors in the sides of the Draft Shield framework.
Note: The glass doors must be inserted in the Draft Shield framework before
inserting the top door; likewise, you must remove the top door before you
remove the side doors.
• Hold and position each door so that the handle is near the front of the
balance and the small notch on the bottom edge of the door is lined up
with the tab that protrudes from the side of the balance housing (shown
below).
• Insert the top edge of the glass door into the recessed area under the top
crossmember of the Draft Shield framework.
• Slide the notch on the bottom edge over the tab and slip the door in place.
5.The door may now be opened by sliding it toward the back of the balance.
Left Door
Adventurer SL
Close-up of Tab
Right Door
Close-up of Notch