Mode Sub-Menu - OHAUS Adventurer SL Serie Manual De Instrucciones

EN-20
3.5.2 Setup Menu (Cont.)
Global Reset
The Global Reset Menu Item is used to reset all
balance settings to their factory default values.
When GBL RST is displayed, press Yes to enter
this Menu Item.
When RESET is displayed, press Yes to reset the
balance, or press No to abort and go to the END
SETUP Menu Item.
End Setup Menu
When END SET is displayed, press Yes to exit
the Setup Sub-menu and move to the Mode
Sub-menu, or press No to return to the first
Menu Item in the Setup Sub-menu.

3.5.3 Mode Sub-Menu

The Mode Sub-menu is used to enable three
application modes, Weigh, Count and Percent.
From Menu, Press No to go to MODE. When
MODE displays, press Yes to enter the Mode Sub-
menu.
Weigh
The Weigh Mode is SET ON or SET OFF.
From the Mode Sub-menu, press Yes when WEIGH
is displayed, or press No to display the other
modes. When Weigh is selected, the Weigh
setting is flashed. Press No to go to the other
setting or Yes to accept the setting and return to
the Mode Sub-menu. The default for Weigh is
SET ON.
Count
The Count Mode is used to count the number of
items (pieces) on the weighing pan. The Count
Mode is SET On or SET OFF.
Press No on the Mode Sub-menu until Count
displays. Press Yes and the display flashes the
current setting. Press No to display the other
setting. When the desired setting flashes, press
Yes to accept this setting. The default setting is
SET OFF.
Adventurer SL