OHAUS Adventurer SL Serie Manual De Instrucciones página 27

Adventurer SL
3.5.4 Unit Sub-menu (Cont.)
M-Units (Momme, Mesghal)
When UNIT m is displayed, press Yes to show M-
Units settings. These are SET OFF, SET MOMME,
or SET MESGHAL. SET OFF is the default setting.
Note: Only one M-Unit may be enabled at a time.
Press No until the desired setting is displayed.
Press Yes to accept the setting and return to the
Unit Sub-menu.
Custom Unit
Custom Unit is used to create a unit of measure not provided with the balance, and
to display weight measurements in this custom unit. Before using Custom Unit, it
must be Set ON in the Unit Sub-menu. The Custom Unit is defined by a conversion
factor and a Least Significant Digit (LSD). The conversion factor is created by entering
a Factor and an Exponent (E) of the weight in grams, according to the formula:
Custom Unit = Factor x 10
custom unit of measure. The Factor is a value from 0.1000000 to 1.999999. The
Exponent moves the decimal point of the factor to the right or left. The Least Significant
Digit (LSD) is the value by which the displayed weight is increased or decreased.
To create a custom unit, press Yes when UNIT is
displayed.
Note: Variables for defining a Custom Unit appear
once in the following order: FACTOR, E, and LSD,
followed by END UNIT.
Set the Factor
When FACTOR appears on the display, press Yes
to display the Factor. Press No to go to the next
variable, Exponent.
grams. . . . . The balance will use this to convert grams to a
E
EN-23