Installing The Fan - LUCCI Air AIRFUSION GIRONA Manual De Instrucciones

Airfusion Penta Installation Instructions
INSTALLING THE MOUNTING BRACKET
The ceiling fan must be installed in a location so that the blades are 300mm spacing from the tip of the
blade to the nearest objects or walls.
Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least 30kg,
with two long screws provided. Ensure at least 30mm of the screw is threaded into the support.
NOTE: The bracket screws provided are for use with wooden structures only. For structures other
than wood, the appropriate screw type MUST be used.
Angled Ceiling Installation
This fan hanging system supports a maximum 0 degree angled ceiling installation.
HANG UP THE FAN
1. Lift the fan assembly with canopy (5) to the mounting bracket
(2).
2. Hang up the fan assembly by securing the steel cord (4) on the
stopper of the mounting bracket (3). Fig. 3
3. Insert the remote receiver into the mounting bracket.
4. Connecting the remote receiver power input wires and fixed
wiring via the 4-ports quick connectors (1); connecting remote
receiver power output wires and motor wires via the 4-ports
5 | P a g e

INSTALLING THE FAN

Fig. 3
Fig. 2
V e r 1 . 0