Using Your Ceiling Fan; Remote Control - LUCCI Air AIRFUSION GIRONA Manual De Instrucciones

Airfusion Penta Installation Instructions

REMOTE CONTROL

Your ceiling fan is controlled via the remote control. There are 4 buttons (HI, MED, LOW, OFF) to control
the fan speed and one button to control light on/off. Fig. 10
Before operating the remote, the following must be considered.
-
2 x AAA 1.5V (size) batteries are required to operate the remote control. Remove the battery cover
from the back of the remote and insert 2 x AAA batteries. Ensure the polarities are correct as
shown in the battery compartment. (Batteries not included.)
-
The remote (transmitter) and receiver must be configured so that communication between each
other is paired up. This is achieved by setting the DIP switch on the receiver and remote on the
same setting.
Note: The DIP switch assembly has 4 switches which can be setup to 16 different transmitting code
combinations. This is practical when there is more than 1 remote/receiver pair operating locally or
in the same room.
Note: To access the receiver DIP switches, remove the DIP switch cover.
8 | P a g e
Fig. 7

USING YOUR CEILING FAN

V e r 1 . 0