Options And Accessories; Product Description; Technical Specifications - PLYMOVENT ControlGo Manual De Instalación Y De Uso

1.4

Options and accessories

The following products can be obtained as an option and/or
accessory:
- LightTower
- PT-2500 | External pressure sensor
1.5

Technical specifications

1.5.1 ControlGo/Panel
Dimensions refer to Fig. I on page 75
Weight 11 kg (24 lbs.)
Material of housing sheet metal
Protection class IP 65
Input voltage 100-240 VAC, 50-60Hz
Internal operating 24 VDC
voltage
Power consumption max. 60 W
Inputs 5x digital input (10 mA wetting current)
1x analogue input (4-20 mA)
Outputs 2x relay output (max. 30 VDC, 2,5 A)
2x output "low side switch" (24 VDC, 2,5 A)
1x output "low side switch" (24 VDC, 250 mA)
4x output "low side switch" (24 VDC, 30 mA)
Internal connectors 1x CAN + power (Control/SlaveBoard)
1x USB 2.0 (host only, USB A receptacle)
1x ethernet (for service purposes)
1x RS-232 (for service purposes)
Internal pressure 1x integrated pressure sensor
sensors
Working range: 0-4000 Pa (0-16 in. WG)
Guidelines & EMC 2014/30 EU
standards
EN 61000-6-2
EN 61000-6-4
Approvals & CE
certificates
cULus (UL 508A)
1.5.2 Control/SlaveBoard
Operating voltage 24 VDC (+/- 15%)
Current max. 2,5A
Internal connectors 2x CAN + power (max. 24 VDC, 2,5A)
Guidelines & EMC 2014/30 EU
standards
EN 61000-6-2
EN 61000-6-4
Approvals & CE
certificates
1.6 ambient conditions
1.6.1 ControlGo/Panel
Ambient temperature:
- min.
- nom.
- max.
Max. relative humidity
Suitable for outdoor use
1.6.2 Control/SlaveBoard
The ambient conditions of the MDB or SCS / EDS filter system
apply.
4. For the filter pressure
0000112607/170717/0 ControlGo
4
LVD 2014/35 EU
IEC 60204-1
IEC 61131-2
IEC 61439-1
LVD 2014/35 EU
IEC 60204-1
Pressure sensors:
internal external
0°C (32°F) -20°C (-4°F)
+20°C (68°F) +20°C (68°F)
+50°C (122°F) +50°C (122°F)
80%
yes
2

pRoDUct DEScRiptioN

2.1 Components
The product consists of the following main components and
elements:
2.1.1 ControlGo/Panel
Fig. 2.1
A Housing
B Control panel
C PC board (master board)
D Tumbler switch 0-1 | Service Mode
E Main switch
F Power supply
G Bottom plate with cable glands
A B
E
Fig. 2.1 Main components Panel
2.1.2 Control/SlaveBoard
Fig. 2.3
A Housing
B PC board (slave board)
Fig. 2.3 Main components SlaveBoard
2.1.3 Connection cables
Cables to connect the Panel to the SlaveBoard(s).
2.2 Operation
ControlGo is an intelligent platform that controls a filter
system MDB, SCS or EDS and the connected extraction fan. It
monitors the availability of compressed air and arranges the
filter cleaning system.
You can operate the system in two ways:
- manually by the push buttons on the control panel
- automatically by signals from an external device
Fig. 1.1 and Fig. 1.2 show the connection of the components
of ControlGo with the filter system and extraction fan.
2.2.1 Automatic progressive filter cleaning
The filter cartridges of the connected filter system are cleaned
from the inside out by compressed air pulses. To optimize the
C D
F
G
A B
EN - 4