Technical Specifications - Beurer BF 100 Body Complete Instrucciones Para El Uso

No measurement possible
Possible errors
The control unit was not activated
before you stepped on the scale.
Cordless connection between scale
and control unit is interrupted.
The control unit is too far away from
the scale.
The batteries in the scale are flat or
incorrectly inserted.
Incorrect weight measurement
Possible errors
The scale is not zeroed
correctly.
Scale is on carpeting.

17 Technical specifications

Dimensions of the scale
Scale batteries
Control unit batteries
Cordless transmission
Measuring range
Weight, bone mass unit
Unit for body fat, water and muscle
BMR, AMR unit
Subject to technical modifications.
The scale conforms to EC Directive 2004/108/EC + supplements.
42
Remedy
Switch on the control unit first before the measure-
ment. If necessary, wait 30 seconds, then repeat the
measurement.
Reinsert the batteries for the scale and the control unit.
Maintain a larger distance from the following electro-
magnetic sources: high-voltage pylons, television or
wireless computer systems, fitness equipment, mobile
phones, weather stations.
Reduce the distance between the scale and control
unit; maximum distance is 2 metres.
Change the batteries (see page 27) and check that
they are inserted the correct way round.
Remedy
Before taking a measurement, activate the scale briefly with your
foot until the operating status indicator lights up.
Wait approximately 5 seconds and repeat the measurement. For
your information: because you would normally step onto the scale
immediately, the scale saves the zero point when the scale is
switched off (when the
Place the scale on a level and solid surface.
Stand with your feet as far apart as possible without tipping the
scales.
operating status indicator goes out).
330 x 330 x 41 mm
3 x 1.5 V type AA
3 x 1.5 V type AA
433 MHz
5 kg to 150 kg
11 lb to 330,6 lb
0,79 St. to 23,61 St.
100 g / 0,2 lb / 0,2 lb
0.1 %
1 Kcal