Balanced Body Allegro Manual Del Usuario página 21

How to install your Allegro Reformer®
Standing Platform latch
This latch is designed to retrofit your Allegro Reformer and is
mandatory for use with the Allegro mat conversion.
TOOLS (NOT INCLUDED)
» Phillips head screwdriver
» Adjustable wrench
Parts included in the kit
Description
A Latch plate
B Nylock nuts
C Pre-load studs
D 3/16" Allen key
E Bumpers
F Sheet metal screw
G Packet lubricant
A
G
Parts
Quantity Part no.
1 600-013
2 GEN9021
1 204-001
1 GEN9280
2 204-050
1 GEN9064
1 207-000
D
C F B E
REMOVE BOLTS
1. Remove the 2 pre-load
studs on the right side
of the machine with the
provided allen key and an
adjustable wrench.
See Figure A.
2. Discard studs and nuts
INSTALL LATCH ON FRAME
3. Apply a small amount of
the included lubricant in
the space between the
pre-load studs removed in
step 1.
4. Slide latch so that the bolt
holes are visible through
the slots in latch. See
Figure B.
5. Insert the provided pre-load studs into latch slots and through
bolt holes in the frame.
6. Install a Nylock nut on each stud. Tighten completely.
Fig A
Fig B
21