Operation; Before Use - Signature Kitchen Suite SKSFD3604P Manual Del Propietário

10 OPERATION

OPERATION

Before Use

Clean the refrigerator thoroughly and wipe off all dust that accumulated during shipping.
The inside of the refrigerator may smell like plastic at first. Remove any adhesive tape from
inside the refrigerator and open the refrigerator door for ventilation.
Connect the power supply.
Check if the power supply is connected before use.
Allow the refrigerator to run for at least two to three hours before putting food in it.
This is normal. The volume will decrease as the temperature decreases.
CAUTION
Do not scratch the refrigerator with a sharp object or use a detergent that contains
the refrigerator. Remove adhesive residue by wiping it off with your thumb or dish
detergent.
Do not peel off the model or serial number label or the technical information on the
rear surface of the refrigerator.
CAUTION
Putting food in the refrigerator before it has cooled could cause the food to spoil, or a
bad odor to remain inside the refrigerator.