Signature Kitchen Suite SKSFD3604P Manual Del Propietário página 37

Doors are opened often or
Unit is installed in a hot
location.
food was added to the
compartment.
warm.
Doors not closed correctly.
Temperature control is not
set correctly.
Defrost cycle has recently
completed.
Incorrect temperature control
cold.
Solutions
When the doors are opened often or for long periods
of time, warm, humid air enters the compartment. This
raises the temperature and moisture level within the
compartment. To lessen the effect, reduce the
frequency and duration of door openings.
The refrigerator should not be operated in
temperatures above 110 °F.
Adding food warms the compartment requiring the
cooling system to run. Allowing hot food to cool to
room temperature before putting it in the refrigerator
will reduce this effect.
See the Doors will not close correctly or pop open
section in Parts & Features Troubleshooting.
If the temperature is too warm, adjust the control one
increment at a time and wait for the temperature to
stabilize.
During the defrost cycle, the temperature of each
compartment may rise slightly and condensation may
form on the back wall. Wait 30 minutes and confirm
the proper temperature has been restored once the
defrost cycle has completed.
If the temperature is too cold, adjust the control one
increment at a time and wait for the temperature to
stabilize. Refer to the Control Panel for more
information.
TROUBLESHOOTING 37