Signature Kitchen Suite SKSFD3604P Manual Del Propietário página 35

to OFF (some models).
Mode.
Freezer section
cycle.
installed.
relocated.
older model.
restored.
The door is opened often or
food was added.
runs too much.
Doors are not closed
completely.
hot location.
Solutions
Turn the control ON. Refer to the Setting the Controls
section for proper temperature settings.
Display Mode allows the lights and control display to
work normally while disabling cooling, to save energy
while the refrigerator is on the showroom floor. See
the FAQs section of this manual for instructions on
how to disable Display Mode.
During the defrost cycle, the temperature of each
compartment may rise slightly. Wait 30 minutes and
confirm the proper temperature has been restored
once the defrost cycle has completed.
It may take up to 24 hours for each compartment to
reach the desired temperature.
If the refrigerator was stored for a long period of time
or moved on its side, it is necessary for the refrigerator
to stand upright for 24 hours before connecting it to
power.
Modern refrigerators require more operating time but
use less energy due to more efficient technology.
The refrigerator will take up to 24 hours to cool
completely.
Adding food and opening the door warms the
refrigerator, requiring the compressor to run longer in
order to cool the refrigerator back down. In order to
conserve energy, try to get everything you need out of
the refrigerator at once, keep food organized so it is
easy to find, and close the door as soon as the food is
removed. (Refer to the Food Storage Guide.)
Firmly push the doors shut. If they will not shut all the
way, the "Doors will not close correctly or pop open"
section.
The compressor will run longer under warm
conditions. At normal room temperatures (70 °F)
the time. Under warmer conditions, expect it to run
even more often. The refrigerator should not be
operated above 110 °F.
TROUBLESHOOTING 35