Preparing The Darts; Problems And Help; Mounting - Carromco ADMIRAL-501 Manual Del Usuario

92515, 93515 ADMIRAL 501 ENGLISH

MOUNTING

Preparing the darts

Screw the point (tip) and shaft into the grip (barrel). Bend the flight into shape and put it
into the shaft
Suspend the dartboard by means of the two mounting holes in the back. 2 screws are
provided for mounting on the wall. Should the screws not be suitable for your wall, change
them for suitable screws. There needs to be a power socket nearby. According to
international dart match rules, the dartboard should be suspended in such a way that the
height from the floor to the centre of the dart circle is 1.73 m and the distance from the
throwing line to the board is 2.37 m.
about 6mm
Center of the
Dartboard (Bull's Eye)
Wall
Throwing line
237cm

PROBLEMS AND HELP

No display
Press any key.Is the power adaptor connected? Pull it from the wall socket and put it back
again.
The dartboard does not react or behaves unusually
Take out the power adaptor from the dartboard for 2
seconds.
A dart point is stuck in the dartboard.
"Stuc" is displayed. Remove the dart point carefully. If
that does not work, do not try to press the point into the
dartboard. Pull out the power adaptor from the wall socket and from the dartboard. Take
out the screws from the back of the dartboard. Press the point out from the back of the
segment. Do not open any other parts of the dartboard under any circumstances. Screw
the dartboard together again before re connecting the power adaptor.