NSK S-Max pico Manual De Operación página 12

CAUTION
· Be sure to hold the handpiece firmly to prevent the handpiece from slipping out of hand by the spray
pressure when lubricating.
· Supply lubricant until it comes out of the handpiece head.(at least 2 seconds)
· Hold the spray can upright.
Lubrication Oil
S-Max pico M4/S-Max pico B2
1 ) Remove the handpiece from the hose.
2 ) Apply 1-2 drops of lubrication oil into the Drive Air Port shown in the Fig.10.
3 ) Connect the handpiece to the hose. Operate the handpiece for about 10 seconds.
Midwest 4-Hole Borden 2-Hole
Fig. 10
11