S-Max pico M4/S-Max pico B2
(1) Connecting
1) Insert the handpiece correctly into the hose
connector and tighten the Hose Nut. (Fig.3)
2) Make sure the handpiece is connected firmly
to the hose.
4. Insertion & Removal of the bur
CAUTION
· Fully depress the Push Button and insert the bur into the chuck until it is secure.
· Do not use carbide bur when the crown is removed. It may cause malfunction.
· Do not apply too much pressure to the bur. Bur may break or bent or difficult to remove. (Be sure to irrigate water. Cutting should be soft
touch.)
6
(2) Disconnect
Loosen the Hose Nut and and remove from the
Hose.
Tighten
Hose Nut
Fig. 3