Description Of Controls And Indicators - Jungheinrich ECR 327 Instrucciones De Servicio

E Operation
1

Description of controls and indicators

Item Control or indicator
1 Switch latch
2 Discharge indicator (EA)
Information display (CANDIS) o Operating hours indicator
3
4 Keypad (CANCODE)
5 Access module ISM
6 Tiller
7 Jog button
8 Travel regulator
9 "Down" rocker switch
10 "Up" rocker switch
11 Anti-collision button
12 Warning signal button (horn)
13 Tiller locking lever
14 Jog button
15 Brake button
16 High-speed button
t = Fitted as standard
Function
t Switches the control current on and off. Remove
the key to prevent the vehicle being switched on by
unauthorized persons.
t Displays the battery capacity
Shows the residual battery capacity and the
number of operating hours already completed by
the vehicle
o Code settings, access authorization
Travel program enabling
o Starts/switches off the vehicle.
Displays important information, prompts, shock
events, and error messages.
Sets date and time.
t Swiveling tiller; steering and braking
o Travel switch for travel in tiller direction. Coasting
at 5.6 km/h (3.5 mph).
t Controls the direction of travel and speed (see
Section 4.2).
t Lowers the fork.
t Raises the fork.
t Safety function. Automatically moves the vehicle
for approximately 3 s in the direction of travel (R)
and then switches it off until the travel regulator is
moved briefly to neutral.
t Sounds the warning signal.
o Locks the tiller in the travel position.
o Travel switch for travel in tiller direction. Coasting
at 5.6 km/h (3.5 mph).
o Brakes the vehicle mechanically.
t Moves the vehicle in ride-on mode at 15 km/h,
max. (9.3 mph) in the tiller direction or 9.0 km/h,
max. (5.6 mph) in the fork direction.
o = Optional extra
E 1