Starting The Vehicle; Preparing For Operation - Jungheinrich ECR 327 Instrucciones De Servicio

2

Starting the vehicle

Qw W
Before the vehicle can be started, operated or used to lift a load unit, the
driver must ensure that there is nobody in the danger zone.
Daily checks and actions before startup
– Visually inspect the entire vehicle (especially wheels and load-handling equipment)
for signs of damage.
– Check for steering play.
– Visually inspect the battery fixings and cable connections.
2.1

Preparing for operation

– Insert the key in the switch latch (1) and turn it clockwise to the "I" position.
Or:
– On vehicles without a switch latch, enter the enable code via the CANCODE (4, o).
On delivery, the CANCODE start PIN is factory set to 2580. Enter the code via the
keypad and press the Set button to confirm.
– Check that the warning signal (horn) (12) is working correctly.
The vehicle is now ready for use. The discharge indicator (EA) (2) shows the charge
level of the battery.
On vehicles with an information display (CANDIS) (3, o), the remaining battery
capacity is displayed.
12 2, 3 12 4, 5
1
E 5