Start Charging; Stop Charging; Transportation And Storage; Scope Of Delivery - Webasto Pure II Instrucciones De Montaje

EN
NOTE
The key can be removed in both positions. The locked
charging station is not switched off, but is merely in
locked mode (no charging possible).
4.4

Start charging

Fig. 7
NOTE
Always take into account the vehicle requirements before
charging a vehicle.
NOTE
Park the vehicle for charging such as to avoid strain in the
charging cable. See Fig. 7
Action Description
Charging station performs
Connect the charging
u
system and connection
coupling to the vehicle.
tests.
At the start of charging, the
LED strip which was initially
green starts to pulse blue. If
the vehicle is not ready for
charging (e.g. the battery is
full), a blue chase light runs
up and down.

Stop charging

4.5
The vehicle has stopped the charging cycle auto-
matically:
Action Description
LED: Blue chase light run-
Unlock the car if neces-
u
ning up and down. Vehicle
sary.
is connected, not charging.
Unplug the charging
u
coupling from the
vehicle.
u Lock charging coupling
in the holder of the
charging station.
4
If the vehicle does not automatically stop the char-
ging cycle:
Action Description
Charging cycle is stopped.
u Set key-operated switch
The LED changes to a green
to "Off" position.
chase light running up and
down. Operating status N6
Charging cycle is stopped.
Or
The LED changes to a blue
u Stop charging cycle at
chase light running up and
vehicle.
down. Operating status N5.

Transportation and storage

5
Observe the ambient temperature for storage during
transportation. See Technical data.
Transport the charging station only when suitably pack-
aged.
6

Scope of delivery

Scope of delivery
Charging station
Charging cable with charging coupling
Installation kit for wall mounting
– Wall plug (8 x 50 mm, Fischer UX R 8)
– Screw (6 x 70, T25)
– Screw (6 x 90, T25)
– Washer (12 x 6.4 mm, DIN 125-A2)
– Screw (3 x 20 mm, T10)
(2 replacement screws)
– Mounting bracket
– Bushing (1 as replacement part)
Installation kit for charging cable:
– Spiral antikink protection
– Cable tie
– Strain relief clamp
– Screw (6.5 x 25 mm, T25) for fastening
the strain relief clamp
Scope of delivery
Operating and installation instructions
Key
NOTE
The Fischer universal wall plug UX R 8 supplied is a plastic
wall plug made of high quality nylon. The universal wall
plug splays out in solid building materials and catches in
wooden and board materials for excellent retention.
7

Required tools

Tool description
Slot-head screwdriver 0.5x3.5 mm
Torx screwdriver Tx25
Torx screwdriver Tx10
Torque wrench (range covers 5-6 Nm, for
Tx25)
Amount
Torque wrench (range covers 4-5 Nm, for
1
open-ended spanner size 29)
1
Drilling machine with 8 mm drill
Hammer
4
Measuring tape
2
Spirit level
2
Wire stripping tool
4
Installation tester
2+2
EV simulator with rotary field display
Round file
1
Combination pliers
2
1
8 Installation and electrical
1
connection
1
DANGER
Observe the safety information provided here chapter 2,
2
"Safety" on page 1.
Amount
1
2
Amount
1
1
1
1
1
1
1
1
1
1
1
1
1
1
OI II Webasto Pure