Adjusting The Machine Head (Direct-Drive Motor Type Sewing Machine Only) - JUKI CP-180 Manual De Instrucciones

校正用
5. ADJUSTING THE MACHINE HEAD
(DIRECT-DRIVE MOTOR TYPE SEWING MACHINE ONLY)
WARNING :
Be sure to perform the angle adjustment of the machine head by the operation below before using
the machine head.
1 2
A B
3
4
1) Simultaneously pressing switch 1 and switch 2 ,
turn ON the power switch.
is displayed A in the indicator and the
2)
mode is changed over to the adjustment mode.
3) Turn the handwheel by hand and angle B is dis-
played in the indicator when the reference signal
has been detected.
(The value is the reference value.)
4) In this state, align the white dot 2 of the hand-
wheel with the concave 3 of the handwheel
cover as shown in the fi gure.
2
5) Press switch 4 to fi nish the adjustment work.
(The value is the reference value.)
- 3 -