Special Requirements For The Installation Site; Installation - Firex PMKIV Serie Manual De Instrucciones Para La Instalación, El Uso Y El Mantenimiento

1.5. SPECIAL REQUIREMENTS FOR THE
− The room in which the appliance is to operate must be well ventilated.
− In addition, it is good policy to locate the appliance under an extractor hood so that
cooking vapours can be removed rapidly and continuously.
− Current regulations require the installation of a multiple pole switch between the
appliance and the electrical power supply; the switch must have a contact gap of least
3 mm on each pole.
− This appliance requires two water connections: one for hot and one for cold water.
Each line must be fitted with an on-off valve.
Warning! : The electrical isolating switch and the water shutoff valves must both
be located near to the appliance, within easy reach for the user.
Warning! : Only qualified technicians must perform the installation, maintenance
and test of the appliance.
− The appliance must be installed in a well-aired room, possibly under an exhaust hood.
− Remove all the packaging and check that the appliance is in perfect conditions. In case
of visible damage, do not connect the appliance and notify the sales point immediately.
− Remove the PVC protection from the panels.
− Dispose of packaging according to regulations. Generally material is divided according
to composition and should be delivered to the waste disposal service.
Warning! : Only qualified technicians must perform the installation, maintenance
and test of the appliance.
Warning! : Before connecting any parts of the appliance to supplies, make sure
that the latter is equivalent the requirements stated in the technical data
plate, if the appliance has been designed for these supplies.
Instruction manual for installation, maintenance and use
Steam heated kettles PMKIV...
INSTALLATION SITE

2.1. INSTALLATION

7 di 19
Page
- GB -