Attaching The Fan Blades; Installing The Light Plate - Kichler JACE Manual De Instrucciones

ATTACHING THE FAN BLADES

Step 1.Align the 4 holes from the blade to the fan motor assembly .
Secure the blade with blade screw and metal washer pre-assembled.
(Fig.15)
Step 2. Follow the same process for the remaining two blades.
(Fig.15)
INSTALLING THE
Step 1: Remove the 17W LED assembly from the light kit plate by
removing the three light kit plate screws .Set these screws aside
for use later.
Step 2.Remove one of three screw from the fan motor assembly
mounting ring and loosen, but do not remove, the other two screws.
Step 3. Place the key holes from the light kit plate over the two
screws previously loosened from the fan motor assembly mounting
ring. Turn the light kit plate until it locks in place at the narrow section
of the key holes.
Step 4. Secure by tightening the two screws previously loosened
and the one screw previously removed.
14 | KICHLER.COM
LIGHT KIT PLATE
Light kit plate screw
Blades
metal washer
blade screw
Fig. 15
Light kit plate
17W LED assembly
mounting ring
Light kit plate
mounting ring screw
Fig. 16