And Glass Shade - Kichler JACE Manual De Instrucciones

INSTALLING THE

AND GLASS SHADE

NOTE: Before starting installation, disconnect the power by turning
Step 1. While holding the LED assembly under your fan, firmly snap
the wire connection plugs together.(Fig.17)
Step 2. Position the LED assembly on the light kit plate and ensure
the screw holes are properly aligned.(Fig.17)
Step 3. Secure the LED assembly by replacing the three light kit plate
screws previously removed. Tighten all screws securely.(Fig.17)
Step 4. Attach the glass shade to the light kit plate by twisting tightly.
(Fig.17)
LED ASSEMBLY
Light kit plate
light kit screw
LED assembly
Light kit plate
Glass shade
Fig. 17
60" JACE LED FAN | 15
TM