Kichler Cameron Manual De Instrucciones página 9

HANGING THE FAN
Step 9. Lift the motor assembly into position and place the hanger ball into the
ceiling mounting bracket.
Rotate the entire assembly until the "Check Tab" has dropped into the
"Registration Slot" and seats firmly. (Fig. 10)
Registration slot
The entire motor assembly should not rotate (left or right) when seated properly.
Check tab
WARNING: Failure to reattach the cross pin and seat the "Check Tab" can cause
the fan to fall from the ceiling during operation. Take special care to make sure this
Fig. 10
pin is reattached.
9
Cameron |
™