Installation Of Safety Support - Kichler Cameron Manual De Instrucciones

INSTALLATION OF SAFETY SUPPORT

(Required for Canadian installation ONLY)
A safety support cable is provided to help prevent the ceiling fan from falling,
please install it as follows.
Step 1. Attach the provided wood screw and washers to the ceiling joist next to the
mounting bracket but do not tighten. (Fig. 11)
Step 2. Adjust the length of the safety cable to reach the screw and washers by pulling the
extra cable through the cable clamp until the overall length is correct, put the end of the
cable back through the cable clamp, forming a loop at the end of the cable. Tighten the
cable clamp securely. Now, put the loop in the end of the safety cable over the wood screw
and under the washer. Tighten the wood screw securely.
NOTE: Although the safety support cable is required for Canadian installations only. It's a
good idea to make the attachment with any installation.
10 | KICHLER.COM
Ceiling
mounting
bracket Attach safety
cable to ceiling
joist with screw
and washer
Fig. 11