Installing The Batteries - Kichler Cameron Manual De Instrucciones

INSTALLING THE BATTERIES

Remove the battery compartment cover on the back of the CoolTouch
Transmitter and insert both batteries provided. Make sure the + sign is facing up.
Take care during this procedure NOT TO move the frequency dip switches inside this
compartment. The settings MUST remain the same as the settings on the receiver for
proper communication with the control system.
It's a good idea to remove these batteries if your fan is not used for extend periods of
time, (months).
NOTE: Make sure Dip Switch #5 is set to the D position. This enables the dimming function.
™
ON
ON D
X
1 2 3 4
Code Switch
Fig. 20
15
Cameron |
™