Hanging The Fan - Kichler Cameron Manual De Instrucciones

HANGING THE FAN

REMEMBER to turn off the power before you begin. To properly install your ceiling
fan, follow the steps below.
Step 1. Remove the decorative canopy bottom cover from the canopy by turning
the cover counter clockwise. (Fig. 5)
Step 2. Remove the ceiling mounting bracket from the canopy by removing
(and save) one of the two screws. Loosen the remaining screw by a half turn.
(Fig. 5)
Step 3. Pass the 120 volt supply wires from the ceiling outlet box through the
center of the ceiling mounting bracket. (Fig. 6)
Step 4. Attach the ceiling mounting bracket to the outlet box using the screws
and washers included with the outlet box. (Fig. 6)
Step 5. Remove the hanger ball from the downrod assembly by loosening the set
screw, removing the cross pin and sliding the ball off the rod. (Fig. 7)
Ceiling mounting bracket
Canopy
Canopy cover
Fig. 5
CUL Listed
outlet box
Ceiling
Washers
mounting
bracket
Hook
Mounting screws
120V Wires (supplied with electrical box)
Fig. 6
Cross pin
Set screw
Hanger ball
Downrod
Fig. 7
Cameron
7
|
™