Items Supplied; How To Use; Setting Up The Scale - Silvercrest SDWP 180 A1+ B1 Instrucciones De Servicio

Do not step on the scale if its surface is
wet. Risk of slipping!
DANGER from batteries
Only use batteries of the same brand
and type and do not use new and used
batteries together.
Be sure to observe the correct polarity
when inserting the batteries.
Clean the battery and device terminals
before you insert the batteries.
Batteries can be life-threatening if swal-
lowed. You should therefore store bat-
teries and the device out of the reach of
small children. If a battery has been
swallowed, medical assistance must be
sought immediately.
Batteries must not be charged or reacti-
vated by other means, nor must they be
dismantled, thrown into a fire or short-
circuited.
Remove the batteries from the device if
you do not intend to use the device for
a longer period of time, or if the battery
runs out of power. The batteries may
leak and damage the device.
Do not subject batteries to extreme con-
ditions, e.g. do not place the device on
radiators or expose it to direct sunlight.
There is an increased danger of batter-
ies leaking.
If battery acid has leaked, avoid con-
tact with the skin, eyes and mucous
membranes. In case of contact with the
acid, rinse the affected area at once
with plenty of clean water and seek
medical assistance immediately.
WARNING! Risk of material damage
The maximum load of the scale is
180 kg (396 lb / 28 st). Do not over-
load the scale.
Do not deposit any objects on the scale
if not in use.
Protect the scale against:
- Dust and dirt
- Moisture
- Major temperature fluctuations
- Mechanical action such as impacts,
firm pressure, impact of pointed ob-
jects
- Heat exposure (e. g. by a radiator)
- Strong electromagnetic fields.
Do not use any sharp or abrasive clean-
ing aids.
Do not immerse the scale in water and
do not rinse it with water.

4. Items supplied

1 Diagnostic Scale
4 batteries (1.5 V, AAA, LR03) 8
(inserted)
1 copy of the user instructions

5. How to use

• Remove all packing material.
• Check the diagnostic scale for damag-
es.
• At the time of the delivery, the batter-
ies 8 have been inserted. Remove the
protective strip from the battery com-
partment 7.

6. Setting up the scale

The diagnostic scale is a sensitive measuring
device. For good measurement results and
to prevent damage to the scale, please fol-
low the instructions:
• Position the scale on a flat and solid
floor with a firm floor covering. Carpet
is not suited.
• Select a site where the scale is protect-
ed against impacts, moisture, severe
temperature fluctuations, heat sources
and dust.
27
GB