Harbor Breeze 40093 Manual De Instrucciones página 17

FINAL INSTALLATION
8. Assemble the light kit (E) to the switch housing (P) using
the previously removed switch housing screws (II).
Haodwaoe Used
Switch Housing
II
Screw
9. Install the bulbs (J) into the sockets on the light kit (E).
IMPORTANT: Make sure you allow the bulbs (J) and
light kit (E) to cool before you replace the bulbs.
Note: The fan comes with a 190W limiter. When the
total wattage of the lights is over 190W, the lights
do not work. Please replace the bulbs with lower
wattage bulbs.
10. Remove the pre-installed rubber washer (JJ), nut (KK),
end cap (K) and finial (L) from the light kit (E).
Haodwaoe Used
Rubber
JJ
Washer
KK
Nut
8
x 3
P
9
J
10
x 1
x 1
17
KK
K
Lowes.com/harborbreeze
II
E
E
E
JJ
L