Standard Or Angle Mounting Instructions - Harbor Breeze 40093 Manual De Instrucciones

STANDARD OR ANGLE MOUNTING INSTRUCTIONS

1. Remove the downrod pin (EE) and downrod clip
(DD) from the downrod (A). Then partially loosen the
motor-housing set screws (FF) in the yoke at the top
of the motor assembly (F).
Helpful Hiat: Downrod style mounting is best suited
for ceilings 8 ft. or higher. For taller ceilings you may
want to use a longer downrod (not included). Angle
style mounting is best suited for angled or vaulted
ceilings. A longer downrod is sometimes necessary
to ensure proper blade clearance.
Haodwaoe Used
DD
Downrod Clip
EE
Downrod Pin
Motor Housing
FF
Set Screw
2. Insert the downrod (A) through the canopy (C) and
yoke cover (S). Thread the wires from the motor
housing (F) through the downrod (A).
1
DD
x 1
x 1
x 2
2
9
A
EE
A
S
F
Lowes.com/harborbreeze
FF
F
A
C