Troubleshooting - STEINEL PROFESSIONAL L 690LED Guia De Inicio Rapido

Adjusting the detection zone
The detection zone can be limited to suit requirements.
The shrouds supplied with the light can be used to mask
out as many lens segments as you wish. This prevents
the light from being activated unintentionally, e.g. by
cars, passers-by etc., and allows you to target danger
Manual override function
If a mains switch is installed in the mains supply lead,
the light is capable of the following functions in addition
to the simple ON/OFF function:
Sensor operation
1) Switch light ON (when light is OFF):
Turn switch OFF and ON once.
Light stays ON for the period selected.
2) Switch light OFF (when light is ON):
Turn switch OFF and ON once.
The light goes out or switches over to sensor mode.
Technical specifications
Dimensions (H x W x D): 291 x 291 x 104 mm (L 690 LED)
291 x 291 x 126 mm (L 691 LED)
Mains voltage: 230 – 240 V/50 Hz
Output: 16 W Power LEDs 320 lumens / 20 lumens/W
Colour temperature: 3200 kelvin (warm white)
LED life expectancy: 50.000 hours
Angle of coverage: 360° with sneak-by guard
Detection reach: 8 m all round
Twilight setting: 2 – 2000 lux
Time setting: 5 sec. – 15 min.
Basic lighting level: 0 or 25%, soft light start
Manual override: 4 hours, switchable
IP rating: IP 44
Protection class: II
Type of material: Aluminium base, glass shade or plastic shade (PMMA)
Temperature range: -20 °C to +40 °C
Operation / Maintenance
The SensorLight is suitable for switching light ON auto-
matically. Weather conditions may affect the way the
SensorLight functions. Strong gusts of wind, snow, rain
or hail may cause the light to come ON when it is not
Declaration of conformity
This product complies with
- Low Voltage Directive 2006/95/EC
- EMC Directive 2004/108/EC
spots. The shrouds can be cut along the pre-grooved
vertical divisions. Then you simply clip them onto the
lens.
Manual override
1) Activate manual override:
Turn switch OFF and ON twice. The light is set to stay
ON for 4 hours (red LED lights up behind lens). Then it
returns automatically to sensor mode (red LED off).
2) Deactivate manual override:
Turn switch OFF and ON once. The light goes out or
switches over to sensor mode.
Important:
The switch should be actuated in rapid succession
(in the 0.5 – 1 sec. range).
wanted because the sensor is unable to distinguish
sudden changes of temperature from sources of heat.
The detector lens may be cleaned with a damp cloth
if it gets dirty (do not use cleaning agents).
- RoHS Directive 2011/65/EC
- WEEE Directive 2012/19/EC
- 12 -

Troubleshooting

Malfunction Cause
n Fuse faulty, not switched ON,
SensorLight without power
break in wiring
n Short circuit
n Twilight control set to night-time
SensorLight will not switch ON
during daytime operation
n Power switch OFF
n Fuse faulty
n Detection zone not properly
targeted
n Internal electrical fuse has
been activated
(red LED flashing rapidly)
n Mains terminal not connected
properly
n Continued movement within the
SensorLight will not switch OFF
detection zone
n Sensor unit is not properly
engaged
n External light source
Basic lighting level does not go out
at about midnight as desired
(e.g. other motion detector or
light) inactivating the SensorLight
n Basic lighting level selected
SensorLight will not switch OFF
completely
n Wind is moving trees and bushes
SensorLight switching ON when
it should not in the detection zone
n Cars in the street are being
detected
n Sudden temperature change due
to weather (wind, rain, snow) or air
expelled from fans, open
windows
n Differing ambient temperatures
Change in SensorLight reach
n Internal fuse activated
Red LED flashing rapidly
n Local power grid
LEDs flickering
Declaration of Guarantee
All rights are based on our guarantee period. We guar-
antee that your STEINEL Professional sensor product
will remain in perfect condition and proper working order
for a period of 5 years. We guarantee that this product is
free from material, manufacturing and design flaws. In
addition, we guarantee that all electronic components
and cables function in the proper manner and that all
materials used and their surfaces are without defects.
Making Claims
If you wish to make a claim, please send your product
complete and carriage paid with the original receipt of
purchase, which must show the date of purchase and
product designation, either to your retailer or directly to
us at STEINEL (UK) Limited, 25 Manasty Road, Axis
Park, Orton Southgate, Peterborough, PE2 6UP.
Remedy
n Fit new fuse; switch ON mains
switch; check wiring with voltage
tester
n Check connections
n Re-adjust (control
)
n Switch ON
n New fuse, check connection if
necessary
n Re-adjust
n Switch SensorLight OFF and
back ON again after 5 sec.
n Firmly press terminal together
n Check detection zone and
re-adjust if necessary
n Lightly press sensor unit to
clip it into place
n Shade SensorLight from extrane-
ous light, observe SensorLight for
several days as it takes time to
return to the correct value
n Turn programme selector
dial to 1
n Change detection zone
n Change detection zone
n Change detection zone,
change site of installation
n Use shrouds to define detection
zone precisely
n Switch SensorLight OFF and
back ON again after 5 sec.
n see note on page 11
For this reason, we recommend that you keep your
receipt of purchase in a safe place until the guarantee
period expires. STEINEL shall assume no liability for the
costs or risks involved in returning a product.
For information on making claims under the
terms of the guarantee, please go to
www.steinel-professional.de/garantie
If you have a guarantee claim or would
like to ask any question regarding your
product, you are welcome to call us at
any time on our service hotline
01733 366700.
- 13 -