SURREY Multi split Manual De Instalación, Operación Y Mantenimiento página 36

1. The refrigerant connections are located on the left side of the heat exchanger
module (considering the positions shown in pictures 3).
2. The electric connections can be made on both side of the ventilation module.
3. The draining connection must be performed on the left side of the heat
exchanger module.
4. If the chosen installation is of the type "on the ceiling", use the side "slots",
which are found on both sides of the ventilation and heat exchanger modules.
Installation brackets are supplied for the modules. They are supplied in the
same package of the heat exchanger module.
5. Ensure the air discharge of one unit is not the air intake of another unit.
6. Avoid installing the equipment near to heat sources, exhausters or flammable
gases, locations subject to heavy rains and strong winds, or exposed to dust.
7. Avoid wet, unlevel, grassy or soft locations. The unit must be leveled.
Picture 3- Minimum gaps required for installation
Assume as minimum assembly distances between the units, the minimum gaps
recommended in picture 2 for each unit.
36
M A N U A L D E I N S TA L A C I Ó N , O P E R A C I Ó N Y M A N T E N I M I E N T O