Fault Code - Volvo Penta Boat Trim System Manual Del Usuario

Fault codes, boat trim system

Fault code

1
Flashing: LEDs 1
and 2 on the port and
starboard sides flash.
2
Flashing: LEDs 3
and 4 on the port
side flash.
3
Flashing: LEDs 3
and 4 on the star-
board side flash.
4
Flashing: LEDs 6
and 7 on the port
side flash.
5
Flashing: LEDs 6
and 7 on the star-
board side flash.
6
Flashing: The two
upper green LEDs
flash.
8
Flash pattern Fault
Indicates that a button on
one of the control panels
is stuck
Indicates that no com-
munication between the
control unit and the port in-
terceptor unit(s) has been
detected.
Indicates that no communi-
cation between the control
unit and the starboard in-
terceptor unit(s) has been
detected.
Indicates that the intercep-
tor blade(s) on the port
side are stuck and cannot
attain the correct position.
Indicates that the intercep-
tor blade(s) on the star-
board side are stuck and
cannot attain the correct
position.
Indicates that no communi-
cation between the control
panel and the control unit
has been detected.
action
Check that no button is
depressed by mistake,
e.g. by an object having
been placed on a control
panel.
Check that the cable(s)
between the control unit
and the interceptor unit(s)
are connected properly.
Check that the cable(s)
are not damaged.
Check that the cable(s)
between the control unit
and the interceptor unit(s)
are connected properly.
Check that the cable(s)
are not damaged.
Check that the interceptor
blade(s) are not obstruct-
ed by biological fouling,
mechanical damage etc.
Clean or replace as nec-
essary.
Check that the interceptor
blade(s) are not obstruct-
ed by biological fouling,
mechanical damage etc.
Clean or replace as nec-
essary.
Check that the cable be-
tween the control unit and
the control panel is con-
nected properly. Check
that the cable is not dam-
aged.