Accessories; Troubleshooting - Festo DMES Serie Instrucciones De Utilizacion

DMES
11

Accessories

Note
S Please select the appropriate accessories from our catalogue
è www.festo.com/catalogue.
Designation
Grease gun with needle−pointed nozzle
Lubrication adapter, outlet axial
(for spindle nut)
Lubrication adapter, outlet radial
(for roller guide)
Lubricating grease
Roller bearing grease for DMES−...−KF
è
*) Spare parts catalogue can be found under www.festo.com/spareparts
Fig. 24
12

Troubleshooting

Malfunction
Axial play too large
(Maintenance and
care")
Squeaking noises or
vibrations
Slide does not move
Fig. 25
36
Possible cause
Wear
Distortions
Ambient temperature too
low (increased break−away
torque during initial start
up due to increasing visco
sity of the lubricants in the
spindle system)
Type
LUB−1
LUB−1−TR−I
LUB−1−TR−L
LUB−KC1
LUB−RN2
Remedy
Send DMES to Festo for repairs
Install the DMES free from distortion
(Evenness of the bearing surface:
0.2 mm)
Grease the DMES
è
( chapter Maintenance and care")
Modify travel speed
Reduce load mass
Reduce travel speed
Permit a higher peak current for servo
motors where necessary
( è Operating instructions for the motor)
Adjust the ambient temperature
Part number
*)
647 958
*)
647 959
*)
647 960
*)
Festo product
*)
Festo product
Festo DMES 0909c English