Changing The Transmission Ratio (Rapid Shift) - Checchi & Magli BABY TRIUM Serie Manual De Uso Y Mantenimiento

Changing the transmission ratio (Rapid Shift)

WARNING
Switch off the tractor engine, remove the ignition
key, and store in a safe place to prevent an accident
during the change of the transmission ratio.
B
UN41-0679BO
For this operation, proceed as outlined below.
1) Unscrew the knob (A).
2) Remove the casing (B).
3) Loosen the knob (C).
4) Push lever (D) to slacken the chain.
5) Move the chain (E) on the pair of pinions correspond-
ing to the plant spacing necessary to plant the seed-
ling.
English language
INFORMATION FOR USE
A
NOTICE
The aim of the change of the transmission ratio is to
obtain the required plant spacing.
See the "Adjusting the plant spacing" chapter to se-
lect the pair of pinions to be used from the range of
possible combinations.
E
C
6) Pull the lever (D) and tighten the chain adequately.
7) Tighten the knob (C).
8) Fit the casing (B).
9) Tighten the knob (A).
33
D
Use and maintenance
6