Assembly Instructions - Harbor Breeze SARATOGA 00798 Manual Del Usuario

ASSEMBLY INSTRUCTIONS

13. Loosen two preassembled screws from fan motor
assembly (H). Remove and save remaining
preassembled screw.
14. Pull the BLUE and BLACK wires from fan motor
assembly (H) through center hole of fitter plate (I).
Align two keyslots on fitter plate (I) with two screws
on black bracket below fan motor assembly (H).
15. Place the fitter plate (I) over two screws and turn
clockwise until it locks. Install previously removed
screw (Step 13, page 10) and securely tighten all
screws.
13
D
screw
Screw
14
Black
bracket
I
Keyslots
15
I
Screw
10
ASSEMBLY INSTRUCTIONS
16. Loosen two preassembled screws from fitter plate (I).
H
Remove and save remaining preassembled screw.
17. Connect BLUE wire from fan motor assembly (H) to
H
BLACK wire from light fitter assembly (J). Connect
WHITE wire from fan motor assembly (H) to WHITE
wire from light fitter assembly (J).
18. Align two key slots on light fitter assembly (J) with two
screws on fitter plate (I). Place light fitter assembly (J)
over two screws and turn clockwise until it locks.
Install previously removed screw (Step 16, page 11)
and securely tighten all screws.
16
Screw
screw
17
H
blue
Blue
black
Black white
White
18
Screw
screw
J
11
I
I
J
I
screw
Screw