M.J. MALLIS GROUP siat F1 Manual De Instrucciones Y Recambios página 65

8-OPERATION
8.1 WORKING CYCLE DESCRIPTION
- Position the pallet on the turntable.
- Place a film reel on the carriage and thread the film as shown in section 11.1.
- Bind the film to the pallet.
- Release the EMERGENCY STOP button by turning it clockwise.
-Select the wrapping cycle as required; see paragraph 12.3.
-Push the start button.
-The machine will wrap a fully working cycle..
-At the cycle end the pallet will stop.
-Tagliare il film e rimuovere il pallet.
8.2 OPERATING MODES
The pallet wrapper is able to operate:
a) 'manual' cycle;
b) 'automatic cycle' (double wrapping with carriage raising and lowering)
c) 'automatic' cycle (single wrapping with carriage raising only).
8.3 EMERGENCY STOP
The lockable emergency stop button is located on the control board.
8.4 NON-EMERGENCY SWITCH OFF
Press button stop cycle.
Turn the main switch anticlockwise to the 0 position
Via Puecher, 22 - 22078 TURATE (CO) ITALY - Tel. 02964951 - Fax 029689727 - http://www.siat.com - Email: siat@siat.com
SIAT S.p.A.
21/44