11-SET UP AND ADJUSTMENT
FILM REEL CARRIAGE WITH ELECTROMAGNETIC BRAKE
Position a reel of film on the reel holder and fix it in place with the lock-
nut as shown in the drawing.
Maximum reel diameter: 300 mm
Maximum film height: 500 mm
Thread the film as shown on the label located on top of the film carriage.
Note: Most strechable films have an adhesive side. Make sure that this
side is positioned as in the drawing. If the film reel is wound with the adhe-
sive side inwards, reverse it and use the threading route shown by the
broken line in the drawing.
ADHESIVE
FILM REEL CARRIAGE WITH NON-MOTORIZED GEARED
PRE STRETCH
Position a reel of film on the reel holder and fix it in place with the lock-
nut as shown in the drawing.
Maximum reel diameter: 300 mm
Maximum film height: 500 mm
Release the brake of the rubber by the lever.
SIAT S.p.A.
25/44
Via Puecher, 22 - 22078 TURATE (CO) ITALY - Tel. 02964951 - Fax 029689727 - http://www.siat.com - Email: siat@siat.com