Chain Tension - M.J. MALLIS GROUP siat F1 Manual De Instrucciones Y Recambios

13-MAINTENANCE AND REPAIRS
Remove the wheel group upwards from its U-shaped housing.
- Remove the shaft 1 and recover the spacers 2 and 3.
- Replace the damaged wheels.
Use only original spare parts.
- Reassemble everything inserting the shaft 1 into the two wheels 4
with the longest spacer 2 at the centre and the two shortest ones 3
at the sides of the two wheels.
Be particularly careful in repositioning the shaft with the wheels inser-
ting the notches of the shaft into the runner.
Turntable 18:
Remove shaft 1, unscrew the two screws 2 and recover washers 3
Replace damaged wheels
Reassemble everything inserting shaft 1 in the two wheels 4
Rescrewing the two screws and washers.
to reduce the possibility of loosening, wet the 2 screws with thread
Lock
pay particular attention when inserting the shaft with the rollers
into theguide.
(Only use original spare parts)

13.13 CHAIN TENSION

Loosen the locking screws 1 of the motor support plate and
act as necessary on the adjustment screw 2.
After have done retighten locking screws 1.
38/44
Via Puecher, 22 - 22078 TURATE (CO) ITALY - Tel. 02964951 - Fax 029689727 - http://www.siat.com - Email: siat@siat.com
1
SIAT S.p.A.
4
1
4
3
2
2