Control Panel - M.J. MALLIS GROUP siat F1 Manual De Instrucciones Y Recambios

9-CONTROL PANEL

9.1 PANEL
1. MAIN SWITCH
Turn clockwise to 'I' position to
power on
2. EMERGENCY STOP
When pressed it stops the ma-
chine at any point of the working
cycle (the button maintain its po-
sition; to release it turn clock-
wise)
3. VOLTAGE WARNING LIGHT
When goes on there is voltage
inside the panel.
4. START-STOP BUTTONS
The button (I) when pushed, in
'automatic' working cycle (with
selector 6 in central position or
turned on the right) start the wor-
king cycle.
The button (O) when pushed, in
'manual' working cycle (selector
6 turned on left) start the turnta-
ble rotation only
Pushing the button ON the acoustic device (13) is activated
for about 5 seconds before the wrapping cycle start.
5. SET-UP PUSHBUTTON
When pushed (warning light goes on) the button enable all
the electrical components of the control panel
The button must be pushed at first start and after an emer-
gency stop 2 or action on safety device.
6. MANUAL-AUTOMATIC SELECTOR SWITCH
Turned as required select the working cycle (manual-auto-
matic with carriage raising and lowering and automatic with
carriage raising only.
22/44
Via Puecher, 22 - 22078 TURATE (CO) ITALY - Tel. 02964951 - Fax 029689727 - http://www.siat.com - Email: siat@siat.com
10
8
7
9
4
3
ON
1
SIAT S.p.A.
7. 'RESET' AND 'RAISING-
LOWERING'
SWITCH
Turned and keept in its posi-
11
tion, in 'manual' working cycle,
cause the carriage to rise or to
12
lower.
Turned to left, in 'automatic'
working cycle, allow the 'reset'
of the machine.
The 'reset' must be done at
first start and after an emer-
6
gency stop 2 or action on a
safety device.
13
8 . E L E C T R O M A G N E T I C
BRAKE ADJUSTMENT
5
(if installed)
On the models with electro-
magnetic brake it adjust the
tension of the reel holder film
carriage.
2
9. TURNTABLE ROTATION ADJUSTMENT
It adjust the speed of the turntable and conse-
quently, more we increase the speed, more film
is attached on the pallet.
10. PALLET BOTTOM WRAPPING TIME
It adjust the stop time of the carriage on the bot-
tom of the pallet.
11. PALLET TOP WRAPPING TIME
It adjust the stop time of the carriage on the top
of the pallet.
12. CARRIAGE ASCENT-DESCENT SPEED AD-
JUSTMENT (if installed)
13. START ACOUSTIC DEVICE (if installed)
Pushing the button ON (4) the acoustic device
is activated for 5 seconds before the cycle start.
SELECTOR