13-MAINTENANCE AND REPAIRS
13.0 SAFETY MEASURES
(see section 3)
Carrying out maintenance and repairs may imply the need to work in dangerous situations.
Only qualified technicians will be allowed to perform maintenance and repair work on the machine.
13.1 TOOL AND SPARE PARTS SUPPLIED WITH THE MACHINE
N. 1
Instruction and spare parts manual
(part. code SMD00004K)
N. 3
0,25 amp fuse (part. code 3.0.06261.00A)
N. 3
8 amp fuse (part. code 3.0.03347)
13.2 TYPE AND FREQUENCY OF CHECKS AND MAINTENANCE OPERATIONS
OPERATIONS
Chain lubrication
Cleaning
Safety devices check
Film carriage raising belt wear check
Rubber-coated roller cleaning
13.3 CHECKS TO BE PERFORMED BEFORE AND AFTER
EVERY MAINTENANCE OPERATION
Before every maintenance operation press the OFF button on the
main switch and disconnect the plug from the control panel.
During the maintenance operation only the operator responsible for
this duty should work on the machine.
At the end of every maintenance operation check the safety devices.
13.4 SAFETY DEVICES CHECK
- Lockable Emergency stop button
32/44
Via Puecher, 22 - 22078 TURATE (CO) ITALY - Tel. 02964951 - Fax 029689727 - http://www.siat.com - Email: siat@siat.com
FREQUENCY
OPERATOR'S SKILL
Quarterly
Monthly
Weekly
Weekly
Monthly
SIAT S.p.A.
2
1
1
1
1