Installing The Anti-Tip Brackets - Signature Kitchen Suite SKSFD3604P Guia De Instalacion

A

Installing the Anti-tip Brackets

WARNING
To avoid injury or damage, check for electrical wires or
plumbing in walls before drilling or installing screws.
CAUTION
To avoid injury, observe all safety practices during
installation, including wearing safety glasses and other
safety apparel.
C
NOTE:
2 anti-tip-brackets are required for each appliance.
The anti-tip-brackets must overlap a minimum of 2 1/8"
(54 mm) over the appliance to secure the appliance.
1. Install the anti-tip brackets at the rear of the enclosure,
the enclosure.
2. Make sure the anti-tip brackets are securely attached
to a stud or other weight-bearing structure.
uncured concrete.
To ensure safety, at least one bracket must be
attached to a stud. Attach brackets to studs wherever
possible within the enclosure. Use a minimum of 3
screws or bolts to attach each bracket.
A
B
/
80 9
16"
(2046 mm)
min.
/
81
9
16"
(2072 mm)
max.
36" Unit
A (Width) 35 3/4" (908mm)
23 7/8"(607mm)
C (Height) 83 ½"(2121mm) min.
Anti-tip brackets (2)
Concrete / Wood wall
17
>2 1 / "
8
(54 mm)