Adjusting Door Panels; Installing Door Trim - Signature Kitchen Suite SKSFD3604P Guia De Instalacion

26

Adjusting Door Panels

Fine adjustments can now be made to align the door
panels.
1. To adjust the door panel horizontally, slide the panel
support screws left or right in the slotted holes as
desired. Have an assistant hold the panel in place
while you tighten the support screws and insert and
tighten all remaining mounting screws.
2. To adjust the door panel vertically or back and forward,
loosen the screws in the appliance door bracket. Move
the plastic rails to make adjustments as desired. Have
an assistant hold the bracket in place while you tighten
all the bracket screws.

Installing Door Trim

After panels have been adjusted, install the decorative
side trim on the doors.
To install, start at the middle and align the trim with the
place by pushing the trim toward the back of the panel.
Once the middle is secure, continue the installation
upward until the remaining trim is completely secure.
In and out
Plastic rail
Up and down
Plastic rail
Door trim
Door trim