Installing Door Panels - Signature Kitchen Suite SKSFD3604P Guia De Instalacion

C

Installing Door Panels

Typical panel dimensions are based on an 84" (213.4
dimensions.
upper then lower drawer panel, if needed.
surface.
2. Locate the correct side of the door panel template for
top and left sides of the panel.
3. Use the template to mark the correct screw locations
on the back of the panel.
and right sides of the panel.
5. Use the template to mark the correct screw locations
on the back of the panel.
the top on each side. Stop when the screws are 3/16"
(4 mm) proud of the panel. These will be the
support screws during the panel installation.
7. Insert the support screws in the slotted holes on the
appliance door mounting brackets so that the panel is
hanging on the door.
CAUTION
Beware of pinch points when installing door panels or opening
and closing doors.
TOP DOOR PANEL
BOTTOM DOOR PANEL
BACK OF BACK OF BACK OF
DOOR PANEL DOOR PANEL DOOR PANEL
Mounting door panel
25
4X12