RIEJU MRX-SMX 50 Manual De Taller Chasis página 80

Engine Rieju
Engine
15) UNSCREW the nut (2/F-14) with a 19 mm wrench, whilst holding the flywheel in
place with the special wrench; then remove the following parts in this order: drive pinion,
countershaft drive gear, key, spacer bushing and O-ring.
16) BLOCKING the rotor of the magneto flywheel with the special locking wrench
(1/F-15), unscrew the rotor retaining nut with a 15 mm wrench.
F-15 F-16
17) REMOVE the rotor of the magneto flywheel by means of the appropriate puller
(1/F-16), which must be screwed into the threaded seat of the rotor; whilst holding the
latter in place with a wrench, turn the centre screw.
18) REMOVE the stator by undoing the screws that secure it to the plate (1/F-17).
19) TAKE the stator plate OUT of its seat by removing the 3 screws that secure it to the
crankcase (2/F-17), and remove the key (3/F-17).
F-17
18