Before proceeding see chap. 2
1. Remove the panel and the knobs
REPLACING THE TAP
Unscrew the gas inlet and outlet
1.
connections
Unscrew the thermocouple and pilot
2.
Reassemble the new tap
3.
Check the idle screw (see Technical
4.
Data Tables)
Restore the connections
5.
REPLACING THE THERMOCOUPLE
Unscrew the thermocouple from the tap
1.
Unscrew the thermocouple from the
2.
pilot
Reassemble the new thermocouple
3.
and tighten the connections
REPLACING THE SPARK PLUG
Disconnect the high voltage spark
1.
LOCATION OF MAIN COMPONEN-
TS - see SECT. IMAGES - REF. m)
The layout of the figures is purely indi-
cative and can undergo variations.
1. Burner adjustment knob (see
Knobs, keys and indicator light modes
and functions)
2. Piezoelectric button
3. Cooking grill.
4. Container for water and cooking oil/
grease collection.
5. Splash guard
6. Burner protection
KNOBS, KEYS AND INDICATOR
LIGHT
MODES
FUNCTIONS / SEE ILL SECT. -
REF. m). The description is purely
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
REPLACING COMPONENTS
plug cable
Unscrew the nut
2.
Reassemble the new spark plug
3.
Connect the high voltage cable
4.
REPLACING THE PIEZOELECTRIC
Disconnect the cable from the pie-
1.
zoelectric igniter
Remove the igniter to be replaced
2.
Reassemble the new piezoelectric
3.
igniter
REPLACING THE BURNER
Unscrew the gas connections
1.
Remove screws
2.
Pull out the burner
3.
Fit the new burner
4.
Fasten and connect
5.
When placing the removed
parts back, do not invert their
position
INSTRUCTIONS FOR USE
indicative and can undergo variations.
GAS CONTROLKNOB. Func-
1
tions:
1. Igniting the pilot light and burner
2. Adjusts the flame (minimum - max-
imum)
3. Turns the appliance off
PIEZOELECTRIC
2
(GAS). Performs one function:
1. When pressed, it produces the
spark to ignite pilot light.
STARTING PRODUCTION
Before
operations, see "General safety
AND
information / Residual risks"
Before proceeding with these
- 15 -
BUTTON
proceeding
with
7.
EN
8.
the